Copper and Brass Rolled Products

Copper and Brass Rolled Products

GO BACK

Materials
Rolled products are supplied according to established international standards, such as EN, DIN, ASTM, BS, ISO, AFNOR.

 

Table 1 lists standard alloys cast on a regular basis by HALCOR, for rolling into flat products such as: Strips, Sheets, Cirlces, Cartridge Cups, Discs.

Standard Materials (or Alloys) Used for Rolled Products
Material DIN 1787
DIN 17 660
DIN 40 500
EN 1652
EN1653
BS 2870 ASTM B 36 NFA 53-100
NFA 51-103
Cu Zn P
Electrolytic
copper
E-Cu58 Cu ETP C 101 C 110 00 Cu/a 1 >99.9 - -
Phosphorous Deoxidised
Copper
SF-Cu Cu DHP C 106 C 122 00 Cu/b >99.9 - 0,015 - 0,040
Cu-Zn alloys (Brass) CuZn10
CuZn15
CuZn28
CuZn30
CuZn37
CuZn10
CuZn15
CuZn28
CuZn30
CuZn37
Cz 101
Cz 102
-
Cz 106
Cz 108
C 220 00
C 230 00
-
C 260 00
C 272 00
U-Z10
U-Z15
U-Z28
U-Z30
U-Z36
89-91
84-86
71-73
69-71
63,5-65
Rest
Rest
Rest
Rest
Rest
 
Sheets - Strips
Copper and brass sheets and strips are manufactured mainly according to DIN specifications 1787/17670/40500/17660 with DIN 1751/1791 tolerances or EN 1652/1653
For DHP-Cu sheets and strips destined for architectural use (roofing), guttering, etc) DIM 17650 as well as EN 1172 are applicable.
Tolerances tighter than those specified in DIN 1751 or DIN 17650 may be supplied by arrangement.
Other international standards such as BS, ISO, or ASTM, may also be requested.
Manufacturing range, Sheets
Maximum width supplied is 1000mm (standard width).
Sadece CuZn15 and CuZu10 için maksimum genişlik 800mm
For CuZn15 and CuZu10 only, maximum width is 800mm.
Lengths from 500mm to 4000mm, may also be supplied
DHP - Cu and ETP - Cu Sheets
Thickness
(mm)
Width (mm) Packing
Temper
Soft 1/4 Hard & 1/2 Hard Hard
0.30 to 0.39 by special arrangement 600 to 1000 600 to 1000 600 to 1000  
0.40 to 1.5 600 to 1000 600 to 1000 600 to 1000 Wooden crates of 250 to 2000 kgs with or without paper interleaf
1.5 by special arrangement 600 to 1000 600 to 1000 -  
DHP - Cu and ETP - Cu Strips
Thickness (mm) Width (mm) Temper Packing
0.15 to 0.19 8 to 450 H,A Depending on specific product
0.20 to 0.29 8 to 1000 H,A 1/2 H, A
0.30 to 2.00 8 to 1000 H, 1/4 H, 1/2 H,A
Brass Strips
Thickness (mm) Width (mm) Temper Packing
0.20 to 0.29 8 to 450 H, 1/4 H, 1/2 H,A Depending on specific product
0.30 to 1.50 8 to 1000 H, 1/4 H, 1/2 H,A